How do I charge the batteries the first time I use them?

Important note: charge the batteries prior to first use.

Charging procedure

1. Plug the charger into the wall socket and connect the wire to the batteries.
2. While recharging, the light on the charger will turn RED.
3. Once the batteries are fully charged, the charging process automatically ends and the charge indicator changes back to GREEN.
4. After the end of the charging process, please disconnect the batteries from the charger 

How to switch AC plugs

1. Push and hold the button next to the plug while turning the plug slightly
2. Remove the plug.
3. Install the correct plug by inserting it slightly turned clockwise.
4. Turn the plug clockwise until you hear a click.

Inserting the batteries

To insert/replace the batteries, proceed as follows:

1. Open the inside pocket of the product.
2. Disconnect the battery connector from the product.
3. Remove the batteries and replace them with new ones. Dispose of the old batteries properly.
4. Connect the battery connector to the product.

Important instructions for use

Make sure that the batteries are properly connected with the heated garment (plug locked into place).
Always set the heated garment to your initial reference temperature to maintain a comfortable warm body temperature.